Name: Vestil Aluminum Dock Board Steel Curb
Brand: Vestil
SKU: TAS-10-6036
Price: 1286.63 USD
Availability: InStock

The Aluminum truck dock board with steel safety curbs is designed for portability and safety. The deck is made of tough high strength aluminum tread plate. The edges are beveled for smooth entry and exit. Safety curbs are coated yellow and are constructed of steel with cast tapered ends. Steel legs are bolted on for increased durability. Canted locking legs for easier truck portability. Manufactured in compliance with OSHA. The capacity is based upon the heaviest type of equipment used plus the maximum load carried times the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered. When using three-wheeled fork trucks order dock board with capacity at least four-times the lifting capacity of fork truck. The width of the dock board should be at least fifteen (15) inches wider than the load or equipment passing between the curbs. If the load does not pass between curbs, but is elevated above, add fifteen (15) inches to overall width of equipment.

High-strength aluminum tread plate material is durable yet lightweight
Zinc-plated locking legs are within OSHA compliance
Beveled entrance and exit edges allow for smoother transition
Heavy-duty steel curbs are painted yellow and bolted to deck plate for safer use

TAS-10-6036

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 5	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 56
Usable Length (in.): 36	Plate Thickness (in.): 5/16	Curb Height (in.): 3-9/16
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-6048

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 56
Usable Length (in.): 48	Plate Thickness (in.): 5/16	Curb Height (in.): 3-9/16
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-6060

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 56
Usable Length (in.): 60	Plate Thickness (in.): 5/16	Curb Height (in.): 3-9/16
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-6072

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 72	Plate Thickness (in.): 3/8	Curb Height (in.): 4-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-7236

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 5	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 68
Usable Length (in.): 36	Plate Thickness (in.): 5/16	Curb Height (in.): 3-9/16
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-7248

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 68
Usable Length (in.): 48	Plate Thickness (in.): 3/8	Curb Height (in.): 3-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-7260

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 60	Plate Thickness (in.): 3/8	Curb Height (in.): 4-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-10-7272

Uniform Capacity (lb.): 10000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 9	Usable Width (in.): 68-1/2
Usable Length (in.): 72	Plate Thickness (in.): 3/8	Curb Height (in.): 4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-6036

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 4	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-13/16	Usable Width (in.): 56
Usable Length (in.): 30	Plate Thickness (in.): 3/8	Curb Height (in.): 3-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-6048

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 48	Plate Thickness (in.): 3/8	Curb Height (in.): 4-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-6060

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 60	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-6072

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 72	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-7236

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 5	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68
Usable Length (in.): 36	Plate Thickness (in.): 3/8	Curb Height (in.): 3-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-7248

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 48	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-7260

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 60	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-15-7272

Uniform Capacity (lb.): 15000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 9	Usable Width (in.): 68-1/2
Usable Length (in.): 72	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-6036

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 5	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 36	Plate Thickness (in.): 3/8	Curb Height (in.): 4-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-6048

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 48	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-6060

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 60	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-6072

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 56-1/4
Usable Length (in.): 72	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-7236

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 5	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 36	Plate Thickness (in.): 3/8	Curb Height (in.): 4-5/8
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-7248

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 7	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 48	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-7260

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 10	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 60	Plate Thickness (in.): 1/2	Curb Height (in.): 4-3/4
OSHA: 1910.30(a)	ANSI: MH 30.2

TAS-20-7272

Uniform Capacity (lb.): 20000	Height Difference at 11 degree/19 percent (in.): 12	Location of legs from beveled edge (in.): 11
Bend Degree: 11	Bend Distance from Beveled Edge (in.): 8-3/4	Usable Width (in.): 68-1/4
Usable Length (in.): 72	Plate Thickness (in.): 3/4	Curb Height (in.): 5
OSHA: 1910.30(a)	ANSI: MH 30.2

Vestil Aluminum Dock Board Steel Curb